How Do You Skirt A Manufactured Home on A Sloped Lot?
If you have a sloped lot for your mobile home, you may know that mobile home skirting installation on sloped lots can be a challenge. For almost 25 years, we have been skirting manufactured homes across the United States. Sometimes, though, it can be a thought-provoking experience.
Being the manufacturer of DURASKIRT™, we are sometimes asked, “How high do your mobile home skirting panels reach?” Our answer is always, “as high as you need.” The reason we say that is because we have ways to accomplish almost any height.
Use DURASKIRT™ For Breaking Through the Ground
There has always been a demand for mobile home skirting to look like an extension of the home. This, however, is a problem for wood skirting as wood shouldn’t be in contact with the soil. This is not a problem for DURASKIRT™, since it is made for ground burial. A hybrid solution can also solve the issue of a sloped lot.
How to skirt a manufactured home on a sloped lot.
By using both DURASKIRT™ and wood, you can achieve the site-built appearance for manufactured homes that are on sloped lots. Just imagine, no more rotting skirting and tremendous rodent prevention. We recommend at least a 6” distance between wood and the dirt. So, plan your siding step-downs accordingly.
How to Frame Step-Downs on Sloped Lots
Using standard framing materials and siding to match, extend siding to form step-downs that conform to the slope. Remember to add paper under the siding to prevent moisture from entering the crawlspace. After the framing is installed under the homes’ exterior rim-joist brace, it back to the I-beams. See Photo.
Things to Keep in Mind
- Framing lines up with house above.
- Siding matches brand and style.
Showing the siding and framing stepping down. Ready to install DURASKIRT™ concrete panels below.
- Lap siding reveals are same as home.
- Framing is braced adequately to support back-filling DURASKIRT™.
- Wood is no closer than 6” away from soil.
- Use hot-dipped galvanized nails into siding.
Once all the framing is braced, papered and sided, it’s time for the mobile home skirting installation by adding DURASKIRT™. We recommend digging DURASKIRT™ into the soil a minimum of 6” and back-filling with a coarse rock. This helps to prevent rodents from digging under the mobile home skirting.
Finally, your home will look like a site-built home. Your friends and neighbors will be surprised to know it is in fact a manufactured home. Furthermore, if you haven’t begun your search for new mobile homes, you may want to read our article “Finding The Best Mobile Home Brands.“
Related Articles:
DURASKIRT™ Concrete Board Is Exterior Use & Back-Fill Ready
Leave a Reply